Solutions

Photovoltaic Energy Storage and charging microgrid project in Australia

The project is located in an industrial park in Australia and is designed for indoor use. INPOWER intelligent storage provides DCDC modules and PCS modules. It realizes the coupling of photovoltaic and energy storage on the DC side, provides clean energy supply for the park, and provides stable and reliable power supply for DC charging piles.

View More +
Photovoltaic Energy Storage and charging microgrid project in Australia

Li County 10MW wind power distribution and storage project

The project is located in Li County, Gansu province, with an altitude of 3000 meters and a low temperature limit of -20.1 °C. The main scenario is the wind power distribution and storage project. The energy storage system consists of two sets of 5MW-35KV boost integrated cabins. It is used to balance the power load, ensure the stable operation of t

View More +
Li County 10MW wind power distribution and storage project

Xizang Cuomei 6mw24mwh PV distribution and storage project

The project site is located in Comai County, Shannan City, Tibetan Autonomous Region. The average altitude is 4300 meters. The energy storage system capacity is 6mw24mwh, the project operates stably in the harsh environment of ultra-high altitude and strong wind and sand, and the project applies the network construction control strategy to signific

View More +
Xizang Cuomei 6mw24mwh PV distribution and storage project

Micro-grid project of an industrial park in Australia

The project is located in an industrial park in Australia. INPOWER thinktank provided the DCDC module and PCS module for the project. It realizes the coupling of photovoltaic and energy storage on the DC side, and the DC bus is equipped with DC charging piles, which can realize various application scenarios such as photovoltaic and energy storage s

View More +
Micro-grid project of an industrial park in Australia

Micro-grid project for an industrial park in Congo, Africa

The project is located in an industrial park in the Democratic Republic of Congo in Africa. INPOWER thinktank has provided the DCDC module, PCS module and STS module for the project. It realizes the coupling of photovoltaic and energy storage on the DC side, and can meet various application scenarios such as photovoltaic power supply for load, phot

View More +
Micro-grid project for an industrial park in Congo, Africa

Jiangsu Kunshan station 110MW

Kunshan was the world's largest grid-side electrochemical energy storage power station when it was completed on August 21,2020. The Kunshan Energy Storage Power Station has a construction scale of 110.88 MW193.6 mwh, covers an area of 31.4 mu, and is equipped with 88 sets of prefabricated cabin energy storage batteries, each with a capacity of 1.26

View More +
Jiangsu Kunshan station 110MW

Grid Support Battery Storage for Regulation

This project deployed a 20ft containerized BESS at a remote site. The system's Power Conversion System (PCS) is capable of operating in both VF (Voltage-Frequency) mode for islanded operation and PQ (Active-Reactive Power) mode when connected to the site's microgrid.

View More +
Grid Support Battery Storage for Regulation

Dairy Processing Plant Peak Load Management

This project features a distributed energy storage cabinet installed at a dairy processing plant to address high electricity demand charges and provide grid support. The all-in-one cabinet, integrating PCS, battery, and control system, operates primarily in grid-connected mode.

View More +
Dairy Processing Plant Peak Load Management

Industrial Mining Energy Storage Project

In this project, a 10ft container energy storage system was deployed as an off-grid power source. The PCS operated in VF (Voltage-Frequency) mode to establish grid-forming control. The key challenge involved handling sudden load increase/decrease from heavy engineering machinery.

View More +
Industrial Mining Energy Storage Project

Related Products

PRODUCT

125kW/250kW MPPT + STS integrated Hybrid switching outdoor cabinet

The INPPDTMZ-125/0.4-N-OS-A1 is a MPPT + STS integrated microgrid energy storage outdoor cabinet.

View More + 125kW/250kW MPPT + STS integrated Hybrid switching outdoor cabinet

215kW Inverter Module

The INPPCS-215 module is a modular energy storage inverter designed for 1500Vdc battery systems.

View More + 215kW Inverter Module

Static Transfer Switch Cabinet

STS (Static Transfer Switch) cabinet is mainly used in on/off-grid switching.

View More + Static Transfer Switch Cabinet

250kW/375kW MPPT Integrated Hybrid Outdoor Cabinet

The INPPDTMZ-250 is a MPPT integrated microgrid energy storage inverter cabinet.

View More + 250kW/375kW MPPT Integrated Hybrid Outdoor Cabinet

5MW Boosting Integrated Skid (Centralized)

The In-power Boosting Integrated Skid for energy storage system adopts a structure design to integrate 4 outdoor energy storage inverter cabinets with two-winding Oil Natural Air Natural (ONAN)

View More + 5MW Boosting Integrated Skid (Centralized)

50kW/100kW DCDC Module

The INP-DCDC Bidirectional Converter is applicable for non-isolated DC-to-DC conversion scenarios.

View More + 50kW/100kW DCDC Module

500kW 10ft Container for Energy Storage System

INPHESS-518/500-0.4 is a 500kW 10ft Container for Energy Storage System

View More + 500kW 10ft Container for Energy Storage System

100kW Inverter Module

The 100kW module is a highly adaptable module designed for C&I application scenario, such as power distribution, PV system-charging, industrial drilling

View More + 100kW Inverter Module

261kW Energy Storage Outdoor Cabinet

INP BESS-261-125/0.4 is an outdoor cabinet that can be used for various application scenarios such as C&I or microgrid.

View More + 261kW Energy Storage Outdoor Cabinet

125kW Inverter Module

The 125kW module adopts the latest SiC design, which not only improves maximum efficiency, but also further expands the voltage range that can be applied on the DC side (600Vdc~1000Vdc).

View More + 125kW Inverter Module