Responsibilities:

1. Responsible for the overall scheme design and implementation of power electronics product algorithm software;

2. Responsible for product requirements import analysis, and customer, front-end software, control function requirements of the acquisition;

3. Responsible for problem analysis, software problem solving in test and delivery phase;

4. Software simulation of control algorithm

Requirements:

1. Bachelor degree or above, Major in power electronics and power transmission, electrical, electronics or related;

2. At least 5 years experience in power electronics product software development, Active filter energy storage converter photovoltaic, wind power converter product design experience, familiar with the commonly used control algorithms of these products;

3. Skilled use of CCS, Keil, MATLAB and other design software, C language, VHDL language skilled use;

4. CAN independently design, debug software controller, parameter tuning. Familiar with the common specifications and be able to modify and maintain.

Responsibilities:

1. Responsible for the design, development and optimization of the main loop of the product hardware, including hardware schematics, circuit boards, implementation of PCB layout, wiring, etc.

2. Responsible for the detailed design of hardware development according to the integrity of product power hardware;

3. Responsible for improving the comprehensive competitiveness of hardware products, around the two aspects of cost, quality, from DFX, environmental adaptability, maintainability aspects of hardware design;

4. Responsible for solving the hardware problems and improving the related work in each stage of the product;

Requirements:

1. Master degree or above, experience can be extended to bachelor degree;

2. Experience in hardware design, device selection, energy storage and high-capacity power product development in power electronics industry;

Responsibilities:

1. Responsible for providing pre-sales technical support to assist the front-end output to meet customer requirements of technical documents;

2. Responsible for the structural design of large-scale energy storage/industrial and commercial energy storage projects, such as Booster Integrated Cabin, string cabinet, energy storage integrated cabinet, communication cabinet, distribution cabinet, test cabin, container energy storage system, microgrid system, etc. , and continuous optimization of product design, reducing costs and increasing efficiency;

3. Responsible for designing and outputting 2D drawing, 3D drawing, explosion drawing, structure BOM and other files of corresponding parts, and writing related design documents;

4. Solve the related structural technical problems in design, production and after-sales site, responsible for product maintenance and after-sales quality failure analysis;

5. Responsible for new product (including overseas) structure development, sample production, trial production, mass production stage, process problem exception handling;

6. Responsible for new products (including overseas) pre-production structural test planning, test reports, performance requirements, system installation, packaging, transportation, printing related documents;

7. Assist the purchasing department to do the Technical Evaluation and product certification for the outsourcing suppliers.

Requirements:

1. Bachelor degree or above, Major in mechanical design, mechanical manufacturing or related, with large-scale energy storage system, industrial and commercial energy storage system structure design experience;

2. At least 3 years structural design experience in energy storage industry;

3. Familiar with domestic and international smart grid and large energy storage technology industry status and development trends;

4. Be familiar with the design, proofing, making and system configuration of chassis, cabinet and container in electric power field

5. Familiar with new structure material acceptance standard and new material certification;

6. Familiar with the working principle of energy storage system, the main material properties, design and manufacturing process;

7. Skilled use of 3D design software, AutoCAD and other drawing standards and methods of use;

8. Master the selection and marking of tolerance and fit, familiar with the performance and selection of common metal materials and non-metal materials;

9. Familiar with machining process, injection molding process, sheet metal process, understand the basic circuit knowledge;

10. Good communication skills, learning ability, team work spirit.

Responsibilities:

1. Responsible for communication with design institute (customer) , according to the design institute (customer) requirements for product electrical design and communication.

2. Responsible for electrical schematic design, device selection, drawing, BOM preparation, and responsible for the results and effectiveness.

3. Solve the electrical problems in each stage and improve the related work, cooperate with other departments to solve the trial production and mass production of products, handle electrical problems and technical support requirements during manufacturing and quality control.

4. According to customer or other departments support needs, with the completion of the electrical work of technical support.

5. Complete other tasks assigned by the leader.

Requirements:

1. Bachelor degree or above, major in electric, automation or related.

2. At least 5 years experience in electrical design related to energy storage system integration.

3. Proficient in power electronic equipment related national standards, familiar with product design process, with the ability to analyze and locate problems.

4. Familiar with office software, electrical CAD, EPLAN drawing software.

Responsibilities:

1. According to the product development plan, Design Plan and standard test specification, write the corresponding test plan, complete the product test work;

2. Work with R & D Engineer to complete product design validation;

3. According to the National Standard, Industry Standard, enterprise standard design requirements, technical agreement, etc. to write the test specification;

4. Provide product related information, assist related department to solve and deal with technical problems in R & D and production process;

Requirements:

1. College degree or above, Major in electrical engineering, automation or related;

2. More than 5 years experience in power electronics related testing, energy storage industry is preferred;

3. Familiar with related power electronic equipment national standards, familiar with product testing process;

4. Familiar with power electronic devices and related knowledge;

5. be familiar with all kinds of power electronics test equipment.

Core responsibilities:

Direction 1:

1. Energy storage modular PCS, centralized PCS, energy storage system integration and other related products sales;

2. Customer development and maintenance related to industrial and commercial energy storage, new energy storage and shared energy storage power station;

Direction 2;

1. Sales of power quality products;

2. Customer development and maintenance

Requirements:

1. Bachelor degree or above;

2. Experience in power quality, low voltage switchgear, new energy, battery and cell industry is preferred;

Technical work and factory experience background is preferred;

4. Have Strong learning ability, professionalism, sense of responsibility and team spirit;

5. travel.

Responsibilities:

1. Analyze and understand customer requirements, develop appropriate technical solutions;

2. Prepare the technical documents of products or solutions, carry out the detailed work of pre-sale technical solutions;

3. Assist to provide training on products and solutions for customers;

Make timely feedback on technical issues raised by customers and give solutions;

Requirements:

1. Knowledge of PCS/MV Inverter/regenerative braking/inverter feedback/energy storage feedback/super capacity energy storage;

2. Good communication and presentation skills

3. Able to travel independently, complete market research, technical support.

Responsibilities:

1. Be familiar with the design, function and manufacturing process of power electronic products

2. Prepare the process flow, check the manufacturing process before the production order sheet;

3. Standardize the process and functional requirements of the purchasing parts used with the company's products, and sign the sample to the supplier, quality department and purchasing department;

4. In the product development phase, the new product productivity assessment, proofing assessment;

5. Pre-control in the product conversion stage, to remind the production process and the quality of testing matters needing attention;

6. Participate in the improvement of manufacturing process and provide a complete set of process plan for purchasing and production in manufacturing stage.

Requirements:

1. College degree or above, Major in electrical engineering, automation or related;

2. At least 3 years experience in power electronics process;

3. Have certain theoretical and practical knowledge of energy storage product development process, and understand relevant standards and design requirements;

4. Experience in energy storage, SVG, inverter, inverter, converter and other product process development is preferred;

5. Have good problem analysis, communication and coordination and problem-solving skills, good team work.

Responsibilities:

1. Responsible for the control of product quality, to ensure that the quality management system has the ability to replicate batch stability;

2. Responsible for compiling, improving and supervising the implementation of material inspection specifications and related work instructions, and timely training and guidance to suppliers and inspectors;

3. Responsible for the whole process (incoming, process, customer complaints) material quality problem handling, analysis and correction, complete incoming defect analysis, issue FA report;

4. Assist purchasing to complete new supplier development, lead new supplier evaluation, establish new supplier Evaluation Standard and Evaluation Plan, complete supplier site visit and evaluation;

Requirements:

1. College degree or above, Major in electrical, electronic, mechatronics or related;

2. At least 3 years working experience in quality management, preferably in electrical and electronic industry;

3. Knowledge of quality management theory, familiar with ISO9000 or TS16949 quality management system;

4. Knowledge of electrical, electronic and mechanical engineering

5. Familiar with quality management practices;

6. Familiar with Word, Excel and other office software.

7. The field of partial electron, the field of structural parts.

8. Need to travel.